Daniel De La Garza
- Total activity 72
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Articles
Recent activity by Daniel De La Garza-
Receiving Your FieldPrinter: Unboxing and Equipment Checklist
When your Dusty FieldPrinter arrives, use this article to unpack it, confirm every item made it into the box, and know what to do before your first setup. It answers "what's in the box," "what shou...
-
Damaged, Lost, or Stolen Equipment: What To Do
If a piece of your Dusty equipment is damaged, missing, misplaced, lost, or stolen, contact your Dusty point of contact as soon as you notice. This article explains who to reach and what to include...
-
Planning Ink Consumption: How to Estimate Ink Cartridges for a Job
This guide shows you how to estimate how many ink cartridges to bring to a job, so you don't run short mid-print or over-order. If you're packing for a project, planning a print schedule, or settin...
-
Laser Tracker Safety: Laser Class, Eye Safety, and Jobsite Precautions
Your Dusty laser tracker (the AT500 or AT930) uses a low-power laser to track the FieldPrinter and record points. This article explains the laser's safety class, what that means for your eyes, and ...
-
FieldPrinter 2 Anatomy
New to the FieldPrinter? This reference walks through every piece of the FieldPrinter 2 (FP2) system — the robot, the tracking equipment, the power, and the software — and explains what each part d...
-
Dusty Glossary
2D stationing — A stationing mode that uses X and Y only, projecting the layout onto a level plane and eliminating Z-height variations between scanned points. Available with Radio 2 only. (See Dece...
-
Floor Elevation: What Is an Outlier in the Elevation Tab?
Why this article existsWhen a user downloads elevation data from the Elevation tab, Portal offers the option to exclude outlier data. This article explains what "outlier" means, how Portal decides ...
-
The Dusty App: Feature and Tool Overview
The Dusty iPad app (the "Dusty App") is the field controller for the FieldPrinter 2. Operators use it to connect to the robot, station against control points, choose what to print, and run tools li...
-
Supported iPad Models
Dusty provides the iPad. Every FieldPrinter set ships with an iPad that is already configured with the Dusty app, so you do not need to buy or supply your own device. Use the Dusty-provided iPad fo...
-
What Is Dusty Academy? Training Courses and How to Get Access
Dusty Academy is Dusty Robotics' online training hub. It hosts guided courses, written guides, checklists, and practice tests that take your team from first setup to certified operation of the Fiel...