Daniel De La Garza
- Total activity 72
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Articles
Recent activity by Daniel De La Garza-
Floor Elevation: File Preparation
Point Elevation vs. Area ElevationThe two modes answer different questions, and you can use both on the same layout.Point Elevation measures specific locations. You give Dusty a list of points as a...
-
What Surfaces and Floor Types Can the FieldPrinter Print On? (Plus Limitations)
The Dusty FieldPrinter prints full-scale layout directly onto flat, rigid, and stable surfaces. This article lists the surfaces and floor types the FieldPrinter can print on, how the surface affect...
-
How to Set Up and Operate Radio 3
Radio 3 mounts on your tracker tripod, connects to the laser tracker with the included Ethernet cable, and runs on a Milwaukee M18 battery or a 45 W (or higher) USB-C charger. Once the Power light ...
-
Dusty for AutoCAD Plugin: Capabilities, Requirements, and Supported Versions
The Dusty for AutoCAD plugin lets your VDC team prepare robot-ready layout files inside AutoCAD and send them straight to the Dusty Portal for printing on the jobsite. This reference explains what ...
-
Coordinating Your Site and Trades for a Smooth FieldPrinter Deployment
The FieldPrinter lays out fastest when it has a clear, open floor and an unbroken line of sight between the laser tracker and the robot. That depends on more than your Dusty crew — it depends on th...
-
What File Formats and Units Does Dusty Accept?
This reference lists every file type you can bring into the Dusty FieldPrint Platform — layout files (DWG, RVT, and DUSTY files), point and control files (CSV), and images — and explains the units ...
-
July 2026 Release Notes: Image Printing, QR Code Tools, and Project-Level Line Styles
Field Release: iPad & FieldPrinterThis release makes FieldPrinter 2 safer than ever near cliff edges and drop-offs. It delivers a broad set of improvements that Operators will notice in the Dusty i...
-
Radio Specs
Your laser tracker connects to the Dusty FieldPrinter through a radio, and there are three generations in the field: Radio 1, Radio 2, and Radio 3. The differences are in signal coverage, one stati...
-
Laser Tracker Comparison: AT500, AT930, and AT930-NRT (Capabilities, Accuracy, and Range)
Dusty FieldPrinter 2 works with three Leica laser trackers: the Absolute Tracker AT500, the Absolute Tracker AT930, and the AT930-NRT. This article explains what each one does and how they differ....
-
FieldPrinter 2 Print Speed, Production Rate, and Ink Cartridge Coverage
How fast does the FieldPrinter print, how much can it lay out in a day, and how much line does one ink cartridge cover? This article gives the printing speeds, explains what actually sets your prod...