Daniel De La Garza
- Total activity 72
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Articles
Recent activity by Daniel De La Garza-
What Is Dusty Academy? Training Courses and How to Get Access
Dusty Academy is Dusty Robotics' online training hub. It hosts guided courses, written guides, checklists, and practice tests that take your team from first setup to certified operation of the Fiel...
-
Floor Elevation: File Preparation
Point Elevation vs. Area ElevationThe two modes answer different questions, and you can use both on the same layout.Point Elevation measures specific locations. You give Dusty a list of points as a...
-
What Surfaces and Floor Types Can the FieldPrinter Print On? (Plus Limitations)
The Dusty FieldPrinter prints full-scale layout directly onto flat, rigid, and stable surfaces. This article lists the surfaces and floor types the FieldPrinter can print on, how the surface affect...
-
How to Set Up and Operate Radio 3
Radio 3 mounts on your tracker tripod, connects to the laser tracker with the included Ethernet cable, and runs on a Milwaukee M18 battery or a 45 W (or higher) USB-C charger. Once the Power light ...
-
Dusty for AutoCAD Plugin: Capabilities, Requirements, and Supported Versions
The Dusty for AutoCAD plugin lets your VDC team prepare robot-ready layout files inside AutoCAD and send them straight to the Dusty Portal for printing on the jobsite. This reference explains what ...
-
Coordinating Your Site and Trades for a Smooth FieldPrinter Deployment
The FieldPrinter lays out fastest when it has a clear, open floor and an unbroken line of sight between the laser tracker and the robot. That depends on more than your Dusty crew — it depends on th...
-
What File Formats and Units Does Dusty Accept?
This reference lists every file type you can bring into the Dusty FieldPrint Platform — layout files (DWG, RVT, and DUSTY files), point and control files (CSV), and images — and explains the units ...
-
July 2026 Release Notes: Image Printing, QR Code Tools, and Project-Level Line Styles
Field Release: iPad & FieldPrinterThis release makes FieldPrinter 2 safer than ever near cliff edges and drop-offs. It delivers a broad set of improvements that Operators will notice in the Dusty i...
-
Radio Specs
Your laser tracker connects to the Dusty FieldPrinter through a radio, and there are three generations in the field: Radio 1, Radio 2, and Radio 3. The differences are in signal coverage, one stati...
-
Laser Tracker Comparison: AT500, AT930, and AT930-NRT (Capabilities, Accuracy, and Range)
Dusty FieldPrinter 2 works with three Leica laser trackers: the Absolute Tracker AT500, the Absolute Tracker AT930, and the AT930-NRT. This article explains what each one does and how they differ....