Daniel De La Garza
- Total activity 72
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Articles
Recent activity by Daniel De La Garza-
Floor Elevation: Dusty App
Floor Elevation workflows, availability, and outputs may change between releases as the feature is refined.OverviewThis is a step-by-step guide for setting up your FieldPrinter and recording elevat...
-
Floor Elevation: Quick Overview
Floor Elevation lets the FieldPrinter measure how flat your slab is and sync the results to the Dusty Portal. You can measure in two ways: Point Elevation, where the robot drives to specific points...
-
How to Clean FieldPrinter Ink Cartridges
This article explains how to safely clean FieldPrinter ink cartridges to restore print quality and prevent clogs. Regular cleaning helps maintain consistent line quality and prevents printing issue...
-
How to install Ink Cartridges on FieldPrinter 2
Proper installation of Ink Cartridges is required for consistent print quality and to prevent damage to the print head assembly. Incorrect installation can damage the Latch, Cartridge, or internal ...
-
How to Use Vertical Control Points
Vertical control points are surveyed reference points placed on walls and columns instead of the floor. They let the FieldPrinter station and print accurately on jobsites where floor control is imp...
-
Returning Your Dusty Equipment
When your project wraps up or your contract is ending, you'll need to ship your FieldPrinter set back to us. This guide walks you through what to send back, how to pack it, and how to get it to Fed...
-
What Are Control Points and Why Dusty Needs Them
Control points (also called surveyed points, datum points, or simply "control") are fixed reference marks on a jobsite with known coordinates. They tie the digital layout file to the real-world bui...
-
Product Use: Printing Surfaces, Ink Types, and Temperature
Intended Use and Printing SurfacesThe FieldPrinter is built to print full-scale layout onto flat, rigid, and stable surfaces. Supported surfaces include: Concrete Wood Steel Plastics / Polymers Ink...
-
How to Erase or Remove Dusty Ink (When Possible)
Need to erase, remove, or clean up Dusty layout ink after a print? This article explains which ink types and surfaces are generally erasable and which cleaning methods work best.Dusty Robotics offe...
-
Accurately Printing Near a Slab Edge
If your printed lines stop short of a slab edge — near perimeter walls, embeds, façade elements, or exterior framing — this article explains why the FieldPrinter holds back and how to print accurat...