Daniel De La Garza
- Total activity 91
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Articles
Recent activity by Daniel De La Garza-
Virtual FieldPrinter Operator Training: Training Surface Setup
The kit is a heavy duty temporary floor protection board, a knife, tape, and a fine marker. The trainee rolls it out, tapes it down, and measures and marks the four control points at least a day be...
-
How Virtual FieldPrinter Operator Training Works
Virtual FieldPrinter operator training is a live, remote session where a Dusty trainer teaches your operator to set up, station, and print with the FieldPrinter over video and screen sharing. Inste...
-
How Best-Fit Positions Your Printed Layout
When you record control points and press Station, Dusty rotates and shifts the laser tracker's frame of reference so your scanned points land as close as possible to their CAD positions. That proce...
-
How the Laser Tracker Knows It Is Level
A tilt sensor inside the tracker's rotating head measures how far the instrument is leaning away from gravity, in two directions at once. That single sensor is the source of the digital bubble, the...
-
Why the Reflector Is Also Called an SMR
SMR stands for spherically mounted retroreflector — a retroreflector built inside a precision ball. That is the industry name for the small sphere that sits on top of your FieldPrinter. Everywhere ...
-
Why Dusty Uses a Laser Tracker Instead of a Total Station
A laser tracker and a total station measure the same three things — two angles and a distance — and the laser tracker is more accurate on all three, most dramatically on distance, where it is tens ...
-
How a Laser Tracker Works
A laser tracker finds the reflector on your FieldPrinter by measuring three things at the same time — a horizontal angle, a vertical angle, and a distance along the beam — and then steering itself ...
-
AT500 and AT930 Certifications: Laser Class, FCC, CE, and Shipping
Where the equipment is certified Jurisdiction AT500 AT930/AT960 instrument AT Controller United States FCC Part 15 B/C — Class B digital device FCC Part 15 — class A product FCC Part 15 ...
-
Laser Tracker Components (Extended)
Your Laser Tracker ships as a complete measuring system: the instrument itself, the cabling, and a set of accessories packed in the transport container. The AT500 and the AT930 share most of that h...
-
Laser Tracker Safety: Laser Class, Eye Safety, and Jobsite Precautions (Expanded)
Your Dusty laser tracker — the AT500 or the AT930 — is a Class 2 laser product under IEC 60825-1 (2014-05). That means no laser safety glasses, no warning signs, and no laser safety officer are req...