K.H
- Total activity 36
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Activity overview
Latest activity by K.H-
K.H created an article,
AT500 Laser Tracker: Technical Specifications
The Leica AT500 is a laser tracker designed for high-precision industrial measurement. It combines a compact, portable form factor with advanced tracking, angular measurement, and environmental sen...
-
K.H created an article,
AT500: Both Batteries Must Be Installed to Work
The AT500 requires both batteries to be installed. Running it with only one battery — or hot-swapping down to one battery while in use — shuts down the sensor.How to tell if a battery is missingIf ...
-
K.H created an article,
FieldPrinter Won't Power On
If the FieldPrinter won't power on, there are two things to check. Most cases come down to a button press that's too brief. If a longer press and a fresh battery both fail, a 30-second discharge pr...
-
K.H created an article,
New Project Not Showing Up After Reconnecting to Wi-Fi
Who is affectedUsers on iPad app version 2.17 and older.What you'll seeYou open the app on your iPad without a Wi-Fi connection, then reconnect to Wi-Fi later, but a project that was just published...
-
K.H created an article,
How to Verify Control Point Accuracy After Stationing
After stationing, confirm that control points are recorded correctly by checking two things on the iPad: that the reflector icon aligns with a known floor line, and that the reflector icon lands di...
-
K.H created an article,
Why is it showing "Failed to scan control point"?
If you see the error "Failed to scan control point. Make sure the tracker laser is pointing at the reflector, the tracker radio is not in leveling mode, and try again." the radio's display is curre...
-
K.H created an article,
Troubleshooting the Dusty for AutoCAD® Plug-in
If the Dusty for AutoCAD® plug-in isn't working as expected, this article walks you through the most common fixes, from version mismatches and plug-in conflicts to sign-in issues and how to collect...
-
K.H created an article,
Laser Tracker AT500 Status Power Button.
The AT500 power button features a built-in LED indicator that displays the current system status. Understanding these LED states helps you quickly confirm the device is operating normally or identi...
-
K.H created an article,
Understanding the AT500 Status LEDs
The AT500 has Light Emitting Diode (LED) indicators on the front of the telescope. These LEDs communicate the current system state at a glance; no menu navigation required. LED Color and Pattern R...
-
K.H created an article,
Laser Tracker PowerLock: Autonomous Target Acquisition
The defining capability of the Laser Tracker is its PowerLock vision system, an off-axis camera integrated directly into the tracker head. At its core, PowerLock emits an invisible LED beam from th...