ESTEBAN MONTIEL
- Total activity 10
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Activity overview
Latest activity by ESTEBAN MONTIEL-
ESTEBAN MONTIEL created an article,
Creating Line, Square, & Circle Obstacles on the Tablet
OverviewObstacle tools allow you to define areas the FieldPrinter should avoid while navigating and printing. Obstacles do not change the layout geometry; they only control robot movement. Line ob...
-
ESTEBAN MONTIEL created an article,
Best Practices for Using the FieldPrinter in High Sunlight or Highly Reflective Environments
OverviewBright sunlight and highly reflective environments can impact laser tracking reliability and overall print stability. Conditions such as direct sunlight on the slab, polished concrete, met...
-
ESTEBAN MONTIEL created an article,
Quick Guide: Using the Cut Line Feature on the Tablet
OverviewThe Cut Line feature allows you to temporarily block the FieldPrinter from printing beyond a defined boundary. Cut lines are commonly used to control where printing occurs when parts of the...
-
ESTEBAN MONTIEL created an article,
Resending a Portal Invite as an Admin User
Resending a Portal Invite as an Admin UserOverviewAdmin users can resend Portal invitations when a team member did not receive, lost, or accidentally deleted their original invite email. Resending ...
-
ESTEBAN MONTIEL created an article,
Best Practices for Creating a Clear Work Path for the FieldPrinter
OverviewThe FieldPrinter performs best when it can move continuously and predictably across the slab. Foot traffic, equipment, and temporary obstructions interrupt printing, increase total runtime...
-
ESTEBAN MONTIEL created an article,
Creating a Manual Control Point From a Printed Trade Point
OverviewIn some workflows, a surveyed control point is not available, but a reliable trade point has already been printed on the slab. In these cases, you can manually create a control point (CP) i...
-
ESTEBAN MONTIEL created an article,
How to Create an Offset From a Layout Line on the Tablet
OverviewOffsets are parallel copies of an existing layout line at a specified distance. Offsets are commonly used when you need layout guidance in a tight or inaccessible location where the robot c...
-
ESTEBAN MONTIEL created an article,
Changing Line Styles for a Specific Layer on the Tablet
OverviewLine styles control how geometry appears when printed, including line weight, pattern, and arrows. On the tablet, operators can change the line style for an entire layer to improve clarity,...
-
ESTEBAN MONTIEL created an article,
Setting a Layer to Reference Visibility on the Tablet
OverviewReference visibility allows an operator to view layout information on the tablet without printing it. This is useful for alignment checks, coordination, and visual context while ensuring on...
-
ESTEBAN MONTIEL created an article,
Radio Timeout During FieldPrinter Operation
OverviewA radio timeout occurs when the FieldPrinter loses communication with the laser tracker radio. This prevents stationing, verification, or printing from continuing. In most cases, the issue...