Zachary Reiss-Davis
- Total activity 25
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Articles
Recent activity by Zachary Reiss-Davis-
How to Manually Select a Print Head to Print Near Edges and Obstacles
OverviewThe Dusty Field Printer allows operators to manually select which print head the robot prints from. This is especially useful when printing close to walls, edges, or obstacles, where extend...
-
How to Print Specific Layers or Linework Using Different Ink Colors
OverviewOperators can print specific layers or linework using different ink colors (black, red, and blue) to improve clarity and coordination onsite. The robot automatically detects the installed i...
-
How to Properly Store Dusty Equipment Overnight
OverviewProper overnight storage of Dusty equipment helps prevent damage, maintains accuracy, and ensures the system is ready for use the next day. Operators should store all equipment in a dry, sh...
-
How to Level the Tripod for Accurate Printing
OverviewA properly leveled tripod is critical for accurate and clear printing. An unlevel setup can cause distorted, uneven, or incomplete marks. Follow the steps below to quickly level the tripod ...
-
Ink Fading or Not Printing – Operator Troubleshooting Guide
OverviewIf printed marks appear faded, incomplete, or are not printing at all, follow the steps below in order. These steps address the most common causes and help restore normal print quality.1. C...
-
Layout in a Tilt-Up Environment; Key Differences & Best Practices
OverviewPrinting in a tilt-up environment is different from printing inside a fully enclosed structure. Open slabs, lack of walls, and no overhead cover introduce unique challenges that operators s...
-
Troubleshooting Control Points for a Reliable Control Network
OverviewAccurate layout depends on a strong control network that aligns the digital layout file to the real-world jobsite. When control points are poorly placed, inaccurately surveyed, or inconsist...
-
Understanding Control Point Error vs Difference (Delta) Values in the FieldPrinter iPad App
OverviewWhen recording and reviewing control points in the Dusty Robotics FieldPrinter iPad app, operators will see both Error values and Difference (Delta) values. These two metrics serve differen...
-
Requirements for Operating the FieldPrinter on a Jobsite
OverviewBefore you bring the FieldPrinter to a jobsite, make sure the environment, control, and equipment conditions are ready for accurate, uninterrupted layout. This checklist explains what is re...
-
Importing and Managing Control Points (CSV)
Suggested Category: Setup → Control & StationingAudience: VDC Coordinators, Surveyors, Field OperatorsTags: control points, CSV, surveyed control, file prep, portal upload, unit errors, coordinate ...