Syed Jawad
- Total activity 27
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 2
Articles
Recent activity by Syed Jawad-
File Prep Workflow: From Model to Print-Ready Layout
OverviewThe Dusty file preparation workflow is designed to help VDC teams communicate clear, accurate design intent to the field with minimal rework. A well-prepared file leads to:Faster setup in t...
-
AutoCAD Plugin Failed Installation
OverviewThis article explains how to troubleshoot common issues when the Dusty AutoCAD Plugin does not install correctly, fails to appear in AutoCAD, or shows errors during use. These steps cover t...
-
“Layout Too Large: Width and Height Exceed 2 Miles” Error
OverviewIf you see the error message “Layout too large, width and height exceed 2 miles” in the Dusty iPad App or the Dusty Portal, it means that one or more layouts, backgrounds, or point files ex...
-
Troubleshooting High Error Values During Stationing
OverviewWhen you station the FieldPrinter system, Dusty reports error values for each control point (CP). These values indicate how well each scanned point fits into the overall control network. Hi...
-
Why Solvent Ink Fails in Hot Weather
OverviewSolvent-based ink performs best in cool to moderate temperatures. When ambient or surface temperatures exceed 95°F (35°C), solvent ink can become too thin and evaporate too quickly, leading...
-
Radio Does Not Reconnect After Hot-Swapping the Battery
OverviewFieldPrinter 2 (FP2) supports hot-swapping batteries, allowing you to continue working without shutting down the robot. In rare cases, after a hot swap, the radio does not properly reconnec...
-
February 2026 Release Notes: iPad in Spanish and Safety Improvements on Slopes
iPad in Spanish and Safety Improvements on Slopes This release focuses on stronger printing reliability, better layout handling, and improved operator safety on challenging terrain. We’ve also adde...
-
December 2025 Release Notes: 2D Stationing and Updated Field-Ready Layout List
2D StationingWe’ve introduced support for 2D stationing as an enhancement to the laser tracker setup workflow. Previously, all stationing operations were performed in 3D (x, y, z), which is when th...
-
October 2025 Release Notes: Usability Enhancements
Best Practices for Operating in Low TemperaturesWhen the robot detects that operating temperatures are low, the operator will receive a warning in the iPad app that will link to best practices. Tha...
-
September 2025 Release Notes: AT500 Printing at Distance; Ease of Use Enhancements
Improved solvent ink performancePrint quality is more consistent and reliable when printing thick lines with solvent ink at temperatures over 90°F.Printing with solvent ink now supports thicker, lo...